Table of Contents
Advertisement
Available languages
Available languages
MAINTENANCE AND CLEAN
Clean the appliance after each use. Disconnect the plug and wait until the unit cooled off. Do
not use fuel, paint thinner, a brush or polishing powder to clean the induction cooker.
Wipe the unit using a dish washing agent and a damp cloth. Use a vacuum cleaner to remove
dirt from the air supply and exhaust vent.
Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap solution.
Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
Prevent water from running over the unit (if water gets inside the unit, the cooker may malfuncti
on).
Error Code List:
If LED-display shows the error code, please reference to the solution as following.
Error Code
E00
E01
E02
E03
E04
E05
E06
E07
E08
The unit is in standby
mode, but the LED-
display shows nothing,
and the unit sounds
"Dee, Dee, ..."
Cause and Solution
Current is over 15A
Voltage is under 160V.
Voltage is over 270V.
The accessory and spare parts are damaged, please contact the
nearest authorized service facility for trouble shooting, repair and
adjustment.
The accessory and spare parts are damaged, please contact the
nearest authorized service facility for trouble shooting, repair and
adjustment.avu.
The cooking temperature exceeds 150 °C.If you use the function
mode "HEAT" to cook, the max temperature is 150 °C.If the cooking
temperature exceeds 150 °C, the device shows an error code. Plea-
se power off to eliminate the wrong record and let the appliance cool
down. Then plug the power cord again and restart. If you would like
the cooking temperature exceed 150 °C, please use the function
mode "TEMP", the max temperature is 240 °C.
The accessory and spare parts are damaged, please contact the
nearest authorized service facility for trouble shooting, repair and
adjustment.
The cooking temperature exceeds 240 °C while using the function
mode "TEMP". After the device has cooled down, the appliance will
automatically enter standby mode.
You are using unsuitable cookware. Please use the suitable cookwa-
re (with the flat base). Power off to eliminate the wrong record, plug
in the power cord again and restart.
You are using the cookware without the magnetism bottom or the
diameter of the bottom is less than 12cm. Please use the cookware
with magnetic and flat base, such as the iron or cast iron cookware,
the cookware with a 18/0 stainless steel base. And all cookware with
a base whose diameter is 12 to 26cm. Once you use the suitable
cookware, the device will automatically restart.
ENG - 24
Advertisement
Table of Contents
