Instructions For Use - Hyundai IND 210 Instruction Manual

Double induction hot plate
Hide thumbs Also See for IND 210:
Table of Contents

Advertisement

Available languages

Available languages

ENG

INSTRUCTIONS FOR USE

Insert the plug into a suitable socket.
You will hear an acoustic signal. Now the device enters standby mode.
Place suitable cookware in the centre of the hotplate.
Now press the ON/OFF switch to turn on the induction cooker. The control light „HEAT" blinks
and you will hear an acoustic signal.
Now press the „HEAT" or "TEMP" button.
hEAT
Left hot plate (2000 W)
The pre-set power stage „5" is selected and the device turns on (Power stages: 1, 2, 3, 4, 5, 6,
7, 8, 9, 10). With the +/- keys, you can change the settings at any time, ranging from 1-10. Cont-
rol light "POWER" (P7) lights.
Right plate (1400 W)
The pre-set power stage „4" is selected and the device turns on (Power stages: 1, 2, 3, 4, 5, 6,
7). With the +/- keys, you can change the settings at any time, ranging from 1-7. Control light
"POWER" (P7) lights.
TEMP
The pre-set temperature stage „120 °C" is selected and the device turns on (Temperature sta-
ges: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C). With the +/- keys, you can change
the settings at any time, ranging from 60 – 240 °C. Control light "TEMP" (P8) lights.
TIMER FUNCTION:
After having selected the operating mode (power stage or temperature stage), press the "Timer"
key. The cipher "0" appears on the display and the LED-display "TIMER (mins)" next to the dis-
play appears. By using the +/- keys you will be able to select the operating time in increasing 5
minutes (up to 180 minutes maximum), and reducing 1 minute.
5 sec after setting the value the TIMER will start and time will be countdowned in one minute
intervals. Control lights TIMER and POWER/TEPM will lights for all timer interval. Once the time
is up, you will hear an acoustic signal and the device automatically enters standby mode.
AUTOMATIC TURN OFF whEN LIFTING AwAy ThE DISh
When the cooking dish is lifted away from the cooking surface, the unit will TURN itself OFF. If
the dish is returned back on the surface within 15 sec, the cooking process will resume with the
pre-lifting settings. If the dish is NOT returned back within 15 sec, the unit will TURN OFF com-
pletelly.
wARNING: Once the cooking or warming process is finished, disconnect the mains plug from
the out- l et!
ENG - 23

Advertisement

Table of Contents
loading

Table of Contents