Oil And Oil Filter Replacement - Hertz HGS 2-15 Operator's Handbook Manual

OIL AND OIL FILTER REPLACEMENT

Replace the oil and oil filter at every 2000 hours. If within 6 months 2000 hours is not completed,
replace it once every 6 months. In case of oil change definitely replace the oil filter.
- BELT DRIVEN MODELS
OIL FILTER
OIL DISCHARGE VALVE
- DIRECT DRIVEN MODELS
Switch off the compressor.
If the compressor is already cold, first run it 5-10 minutes for warming up of oil and switch it off
again.
Wait for 1-2 minutes for internal pressure discharge and oil to strain down.
Remove the oil charging plug.
Discharge the oil completely by opening the oil discharge valve. After the oil flow is finished,
close the oil discharge valve.
Fill the new oil.
Replace the oil filter by new one and manually tighten.
Complete the connections by installing oil charging plug.
Run the compressor for a few minutes for checking the internal accessory leaks.
After switching off the compressor wait for the fall down of oil and check the oil level. If it
incomplete fill it.
Only use original spare parts for avoiding damage of the oil filter element and your
compressor. The maximum pressure values of other type filer elements may no be
sufficient.
OIL CHARGING PLUG
OIL CHARGING PLUG
OIL FILTER
OIL DISCHARGE VALVE
18