Download Table of Contents Print this page

Titan SPEEFLO PowrTex 1200 SF Owner's Manual

Hide thumbs Also See for SPEEFLO PowrTex 1200 SF:

Advertisement

Quick Links

PowrTex 1200 SF
Airless Texture and Paint Sprayer
Model Numbers:
Complete
Bare
Printed in USA
SPEEFLO
600-150
600-151
Owner's Manual
For professional use only
Do not use this equipment
before reading this manual!
NOTE: This manual contains important warnings
and instructions. Please read and retain for
reference.
© Titan Tool Inc. All Rights Reserved. Form No. 0528920D
1114

Advertisement

Table of Contents
loading

Summary of Contents for Titan SPEEFLO PowrTex 1200 SF

  • Page 1 Airless Texture and Paint Sprayer Model Numbers: NOTE: This manual contains important warnings Complete 600-150 and instructions. Please read and retain for reference. Bare 600-151 Printed in USA © Titan Tool Inc. All Rights Reserved. Form No. 0528920D 1114 •...
  • Page 2: Safety Precautions

    ImPORTANT: When the sprayer is used with a generator • Only use a nozzle tip specified by the manufacturer. or uncontrolled line voltage, the use of Titan’s “Line Surge • Use caution when cleaning and changing nozzle tips. In the Protector”...
  • Page 3: Table Of Contents

    Check for damage or movement of couplings. Immediately replace hose if any of those conditions exist. Never repair a paint hose. Replace with a conductive high-pressure hose. • Do not spray outdoors on windy days. © Titan Tool Inc. All rights reserved.
  • Page 4: General Description

    6. Allow the sprayer to run for 15–30 seconds to flush the old unnecessary wear to the packings. solvent out through the return hose and into the metal waste 6. Make sure the electrical service is 120V, 15 amp minimum. container. © Titan Tool Inc. All rights reserved.
  • Page 5: Preparing To Spray

    12. Unlock the gun by turning the gun trigger • It is safe to move the PRIME/SPRAY valve between positions lock to the unlocked position. • It is safe to change or replace the spray tip © Titan Tool Inc. All rights reserved.
  • Page 6: Control Panel Indicators

    #4 key to set and the Main Screen will appear. To select or change the remaining three pre-sets, scroll to the User Pre-Sets screen and repeat the above procedure. © Titan Tool Inc. All rights reserved.
  • Page 7 If the correct code is entered, the display will show the Main Screen and the sprayer will operate. If the wrong code is entered, the display will © Titan Tool Inc. All rights reserved.
  • Page 8: Spraying Technique

    Shrubs next to houses should be tied back and covered with a canvas cloth. The cloth should be removed as soon as possible. Titan gun extensions are extremely helpful in these situations. Nearby objects such as automobiles, outdoor furniture, etc. should be moved or covered whenever in the vicinity of a spray job.
  • Page 9: Cleanup

    Always contact the supplier of solvents for recommendations. paint out of the return hose into the metal waste container. 4. If you have any further questions concerning your Titan Airless 9. Turn off the sprayer by moving the ON/OFF switch to the OFF Sprayer, call TITAN: position.
  • Page 10: Replacing The Motor Assembly

    Front End Bell Housing Screw Assembly Electronic Control Armature Gear Assembly 1st Stage Gear Motor 2nd Stage Gear Ba e Assembly Housing Gasket Front Gear Box Assembly Housing Shroud Gasket Gasket Shroud Gasket © Titan Tool Inc. All rights reserved.
  • Page 11: Replacing The Transducer

    Valve Stem 12. Secure the motor shroud with the four motor shroud screws. Valve Groove Pin Handle Motor Shroud Screws Electronic Control Assembly Motor Shroud Grommet Transducer Mounting Plate © Titan Tool Inc. All rights reserved.
  • Page 12: Servicing The Fluid Section

    18. Place the piston insertion tool (included in the repacking kit) housing and the foot valve housing are lubricated over the top of the piston rod. with grease and in position. © Titan Tool Inc. All rights reserved.
  • Page 13: Replacing The Filters

    Core Spring NOTE: The filter body should be hand-tightened, but O-ring make sure it is seated fully into the filter housing. Filter Housing © Titan Tool Inc. All rights reserved.
  • Page 14: Troubleshooting

    Faulty or loose wiring. Inspect or take to a Titan authorized service center. Excessive motor temperature. Allow motor to cool. ON/OFF switch is defective.
  • Page 15: Xact Digital Control System Error Messages

    HIGH CONTROL The High Control Temperature screen TEMPERATURE appears when the temperature of the Xact Digital Control System has risen too high. Take the sprayer to a Titan authorized service center for repair. High Load check mechanism Screen (E7) HIGH LOAD...
  • Page 16: Français

    Si vous devez utiliser une rallonge à l’extérieur, celle-ci doit comprendre la marque W-A après la désignation indiquant le type de cordon. Par exemple, la désignation SJTW-A indique que le cordon est conçu pour être utilisé à l’extérieur. Français © Titan Tool Inc. Tous droits réservés.
  • Page 17 Il pourrait s’avérer nécessaire de consulter un plasticien ou un spécialiste en chirurgie reconstructive de la main. Français © Titan Tool Inc. Tous droits réservés.
  • Page 18: Español

    W-A después de la designación del tipo de cable. Por ejemplo, SJTW-A para indicar que el cable es apropiado para uso en exteriores. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 19 La toxicidad es un factor a considerar con ciertos revestimientos inyectados directamente en la corriente sanguínea. Puede ser aconsejable consultar con un cirujano plástico o un cirujano especialista en reconstrucción de las manos. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 20: Parts Listings

    Fitting ................1 763-551 Lock washer ...............2 860-002 Lock washer ...............2 858-625 Screw ................2 860-535 Screw ................2 800-328 Knock-off nut .............1 800-266 Hose (not shown) .............1 800-268 Fitting ................1 818-002 Elbow (not shown) ...........2 © Titan Tool Inc. All rights reserved.
  • Page 21: Drive Assembly

    Pressure control knob ..........1 700-742 Tie wrap (not shown) 704-473 Control panel cover (for sprayers without Xact Digital Control System) ........1 NOTE: All electrical work should be performed by a Titan authorized service center. © Titan Tool Inc. All rights reserved.
  • Page 22: Fluid Section Assembly

    NOTE: When repacking the fluid section, make sure the raised lip on the bottom of the lower packing is fully outside the packing around the piston rod after insertion of the piston rod. © Titan Tool Inc. All rights reserved.
  • Page 23: High Rider Cart

    Groove pin ..............1 700-697 Valve handle ..............1 NOTE: When using “hot” solvents, replace viton valve stem o-ring (item 5) with optional PTFE valve stem o-ring (P/N 700-897). Install using o-ring replacement tool (P/N 700-890). © Titan Tool Inc. All rights reserved.
  • Page 24: Filter Parts

    Xact Instruction label 313-2430 Transducer warning label Item Part # Description quantity 800-705 Filter body ..............1 800-252 Filter spring ..............1 730-067 Filter, 60 mesh ............1 702-251 Filter spring adapter ..........1 757-105 Core spring ..............1 © Titan Tool Inc. All rights reserved.
  • Page 25: Electrical Schematic

    Fuse, 15A Ground Switch WHITE Motor AC-Motor AC-Motor BLACK AC-Line AC-Neut Surge Suppressor Control Panel Electronic Control Board Assembly WHITE WHITE NOTE: All electrical work should be performed by an authorized service center. © Titan Tool Inc. All rights reserved.
  • Page 26: Accessories

    S-3 Stainless Steel Airless Gun • 3900 PSI • Stainless Steel fluid passages • High Pressure Swivel • In-handle filter • 4-finger trigger pull Part # Description 550-250 S-3 — 4 Finger Gun © Titan Tool Inc. All rights reserved.
  • Page 27 Material Safety Data Sheets (MSDS) are available on Titan’s website or by calling Customer Service. Des fiches techniques de sécurité des produits (FTSS) sont disponibles sur le site Internet de Speeflo’s ou par téléphone en vous adressant au Service Client.
  • Page 28: Warranty

    Warranty • Garantie • Garantía Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, or extended warranty published by Titan, Titan’s obligation under this warranty is limited to replacing or repairing without charge those parts which, to Titan’s reasonable satisfaction, are shown to be defective within twelve (12) months after sale to the End User.

Table of Contents