Dialing From The Contacts List; Speed Dialing; Plus Code Dialing - Sanyo Vero User Manual

Dialing From the Contacts List

1.
From standby mode, press
2.
Highlight the entry you want to call.
3.
Press to dial the entry's default phone number.
– or –
Press the navigation key left or right to show
another number for the entry and press
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing
to automatically enter the international access code for
your location (for example, 011 for international calls
made from the U.S.).
1.
Press and hold
screen.
2.
Enter the country code and phone number, and
then press . (The phone automatically
prepends the access code for international dialing,
followed by the country code and phone number.)
22 2A. Phone Basics
(right softkey).
CONTACTS
to display " + " on your phone

Speed Dialing

You can store up to 98 numbers in your phone's speed
dial memory to make contacting friends and family
easier.
You must assign a speed dial number to the existing
phone number beforehand. See "Assigning Speed Dial
Numbers" on page 53.
.
To use speed dial for locations 2-9:
From standby mode, press and hold the
appropriate key for approximately two seconds.
To use speed dial for locations 10-99:
From standby mode, enter a two-digit speed dial
number, and then press
The display confirms that the number has been dialed
when it shows "Connecting...".
Note:
Speed dialing may not be available when you are
roaming; when you are roaming off the Nationwide
Sprint Network, you must always dial using eleven
digits (1+ area code + number).
.