Changing The Backlight Time Length - Sanyo Vero User Manual

Changing the Backlight Time Length

Select how long the main screen and keypad remain
backlit after any keypress is made. You can also
change the backlight for when a Java application is
running in the foreground.
> Settings > Display > Backlight > 
Press
or
Backlight Dim Backlight Off.
If you select
Backlight Dim
Always Dim , or a preset length of time to elapse
before the screen backlight dims.
If you select
Backlight Off
time to elapse before the screen and keypad
backlights turn off. (When you select
for the
Backlight Dim
backlight will turn off after about one minute.)
To set the backlight for when a JAVA application is running
in the foreground:
> Settings > Display > Backlight > 
Press
Java Backlight > Default
This setting is switched to the normal backlight setting
above after the application is terminated or is sent to
the background.
, select
Always Bright
, select a preset length of
Always Bright
setting above, the keypad
or .
Continuous
Note:
Long backlight settings reduce the battery's talk and
standby times.
Setting the Notification Pop-up
This option allows you to enable or disable notification
pop-up when you receive a new notification (except for
incoming call and alarm).
,
1.
Press
> Settings > Display > Notification
2. Select
Enable Pop-up
Tip: If you select
Disable Pop-up
notification icon. (The notification pop-up will not appear
while an application is running.)
Selecting a Picture ID
You can select an image as a picture ID.
1.
Press
> Settings > Display > Picture ID
2.
Select Contact
Private / Unknown
If you select
or
Disable Pop-up
, you will see only a
, or 
, Unsaved Numbers
.
, select an entry.
Contact
2B. Settings
.
.
.
29