Saving A Phone Number - Sanyo Vero User Manual

Press the volume button up or down to adjust the
receiver volume.
Press or
MUTE UNMUTE
between the mute or unmute mode. (Muting
applies to your voice, not the other party's.)
Press to turn the speaker on. Press again to
turn it off.
WARNING:
Because of higher volume levels, do not place the
phone near your ear during speakerphone use.
End-of-Call Options
After you have finished your call, the phone will display
an end-of-call message in the Recent History screen
(see page 45). "Call ended" and the duration of the call
will alternately flash beneath the caller's name (if already
in your Contacts) or the caller's number (if available).
Press any of the following keys to select an option.
Press to call a highlighted entry.
Press to display all history for a highlighted entry.
Press (right softkey) to display the Recent
OPTIONS
History options. (See "History Options" on page 46
for details.)
20 2A. Phone Basics
(left softkey) to switch
Press
SEND MESSAGE
message.
Press to return to standby mode.
Press or simply wait 10 seconds to return to
where you were before the call (if applicable).

Saving a Phone Number

Your phone can store up to 600 Contacts entries and
each entry can contain up to seven phone numbers.
(See "2D. Contacts" on page 49.)
1.
From standby mode, enter a phone number and
press (right softkey)
OPTIONS
first time you are saving an entry to Contacts, skip
to step 3.)
2.
Select or
New Entry
3.
If you chose
New Entry
then enter the new entry name.
– or –
If you chose Existing Entry
you want to save the number, and then highlight a
number type and press
4.
Press (left softkey) to save the entry.
DONE
(left softkey) to send a
. (If this is the
> Save
.
Existing Entry
, select a number type, and
, select an entry to which
.