Selecting A Ringer Type For An Entry; Assigning A Picture To An Entry - Sanyo Vero User Manual

3. Highlight an available speed dial location and
press .
Tip: To replace a current assignment, select a location and
press REPLACE (left softkey).
To check speed dial assignments:
From the Contacts list, press
softkey)
> Settings > Speed Numbers

Selecting a Ringer Type for an Entry

Assign a ringer type to a Contacts entry so that you can
identify the caller by the ringer type. (See "Ringer
Types" on page 32.)
1.
From the Contacts list, highlight an entry and press
.
2. Select
Set Ringers.
3.
Select Incoming Calls
4.
Select Change .
5.
Select a ringer category, and then select a ringer.
54 2D. Contacts
OPTIONS (right
.
or Message .
Tip: If you select
Downloaded > Get New
purchase and download new ringers right from your
phone. For details, see "Getting New Ringers" on
page 32 and "Downloading Games, Ringers, and More"
on page 99.

Assigning a Picture to an Entry

Assign a picture to display each time a certain contact
calls you.
From the Contacts list, highlight an entry and 
1.
press .
2. Highlight and press
3.
Select Choose Photo
4.
Select a photo category by pressing the navigation
key up or down, and then select an image.
If you select
Take New Picture
picture, and then press
in step 5, you can
.
.
, press to take a
OK (left softkey) to assign it.