AT&T 9312 User Manual page 9

2 Connect the telephone line cord(s).
If you have a two-line
jack, use only the line
cord with the black
plugs. Plug one end
into the jack labeled
L1/L2 on the base, then
plug the other end into
the wall jack. Make sure
the cord snaps firmly
into place.
If you have two
separate jacks, use
both line cords. Plug
one end of the line
cord with black plugs
into the jack labeled
L1/L2 on the back of
the base, then plug
the other end into the
wall jack for Line 1.
Plug one end of the
other line cord into
the jack labeled L2 on
the back of the base,
then plug the other
end into the wall jack
for Line 2. Make sure
the cords snap firmly
into place.
3 Connect the power cord.
Use only the power cord supplied with this product. If you
need a replacement, call 1 800 222-3111.
INSTALLATION
7