For Network Users; Web Based Management; Web Browser - Brother HL-3180CDW Quick Setup Manual

For Network Users

Web Based Management

(web browser)

The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings using HTTP (Hypertext
Transfer Protocol).
NOTE
We recommend Windows
®
Explorer 8.0/9.0 for Windows
Macintosh. Please also make sure JavaScript
and cookies are always enabled in whichever
browser you use. To use a web browser, you will
need to know the IP address of the print server,
which is listed on the Network Configuration
Report.
a
Open your browser.
b
Type "http://machine's IP address/" into your
browser's address bar (where "machine's IP
address" is the IP address of the Brother
machine or the print server name).
For example: http://192.168.1.2/

NOTE
If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
For more information, see Network User's
Guide: Web Based Management.
30
®
Internet
®
and Safari 5.0 for
Print the Network Configuration
Report
You can print the Network Configuration Report to
confirm the current network settings.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to display
Print Reports.
Press Print Reports.
d
Swipe up or down, or press a or b to display
Network Configuration.
Press Network Configuration.
e
Press OK.
The machine will print the current network
settings.
Restore the network settings to
the factory default
You can restore all network settings of the internal
Print/Scan server to the factory default.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to display
Network.
Press Network.
d
Swipe up or down, or press a or b to display
Network Reset.
Press Network Reset.
e
Press Yes.
f
Press Yes for two seconds.
The machine will restart. Disconnect the
cables, and after the machine has restarted,
reconnect the cables.