Advertisement

BD
SOLDERING
STATION
Reference Guide

HEAT MANAGEMENT

JBC stations intelligently manage the tool temperature:
Work mode: When the tool is used, pre-set work temperature is 350º C.
Sleep mode: When the tool is in the stand, the temperature goes down to 220º C.
Hibernation mode: After longer periods of inactivity (pre-set i.e 30 minutes), the power is cut off and
the tool cools down to room temperature.
The advantage of this heat management is lifespan increase which ensure low cost of ownership.
www.jbctools.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for jbc BD

  • Page 1 Reference Guide HEAT MANAGEMENT JBC stations intelligently manage the tool temperature: Work mode: When the tool is used, pre-set work temperature is 350º C. Sleep mode: When the tool is in the stand, the temperature goes down to 220º C.
  • Page 2 Reference Guide HEAT MANAGEMENT JBC stations intelligently manage the tool temperature: Work mode: When the tool is used, pre-set work temperature is 350º C. Sleep mode: When the tool is in the stand, the temperature goes down to 220º C.
  • Page 3 SETUP CABLE ASSEMBLY CABLE COLLECTOR Use the cable collector for keeping workplace clear of cable STAND CABLE POSITION CARTRIDGE EXTRACTOR Equipotential Main switch connector Power Cord Socket...
  • Page 4: Technical Specifications

    WARRANTY JBC’s 2 years warranty guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and all necessary labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased enclosing this fully completed form.

Table of Contents