. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Remove the two screws
4. Grasp the outside edges of the I/O assembly and pull the assembly until it
disconnects
CAUTION: Be careful when removing the I/O assembly. The assembly includes a
multiple-pin connector that is firmly connected to the backplane assembly. Pull firmly to
disconnect the I/O assembly from the backplane assembly.
Figure 5-31. Removing the I/O Assembly
5-32
ArmadaStation Removal and Replacement Procedures
securing the I/O assembly to the top brace (Figure 5-31).
1
2
.