Compaq ArmadaStation Maintenance And Service Manual page 111

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15. Remove the two screws securing the backplane assembly to the base assembly
(Figure 5-54).
16. Grasp the top of the backplane assembly and lift up on the assembly and remove it
from the base assembly
NOTE: When removing the backplane assembly, do not use the heatsink
assembly.
Figure 5-54. Removing the Backplane Assembly
Reverse the removal procedure described above to install the backplane assembly.
5-58 ArmadaStation Removal and Replacement Procedures
2 .
1
3 to lift the