Solving Docking And Undocking Problems - Compaq ArmadaStation Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Solving Docking and Undocking Problems

The following table lists some common docking problems and recommended actions to
take when they occur.
Problem
Cannot undock computer.
The computer will not undock
from the ArmadaStation.
The computer will not undock
from the Armada MiniStation.
The computer is not properly
docked or will not dock.
2-2 Troubleshooting
Table 2-1
Solving Docking and Undocking Problems
Probable Cause
The computer is using
Windows NT and a software
application is running.
Security cable is attached.
PC Card cable is attached to
the computer.
The ArmadaStation is locked.
No AC power.
The operating system does
not support undocking while
the computer is on or in
Suspend.
Connectors are tight.
The Armada MiniStation
docking lever is defective.
The computer is not properly
seated in the docking system.
No AC power.
Recommended Action(s)
Exit all applications and turn off the system if
you are using Windows NT. If the computer is
using Windows 95, the system does not need
to be turned off.
CAUTION: Do not force the Armada
MiniStation docking lever forward. Forcing the
docking lever forward can damage the
locking mechanism.
Unlock security cable.
Remove cable from PC Cards before
undocking.
Unlock the ArmadaStation.
Release the computer from the docking
mechanism by sliding the manual release
lever to the right.
Save all work, exit all applications and turn off
the system before undocking.
Grasp the computer and pull forward while
pulling forward on the Armada MiniStation
docking lever.
CAUTION: Do not force the Armada
MiniStation docking lever forward. Forcing the
docking lever forward can damage the
locking mechanism.
Replace the docking lever.
Undock the computer and redock it.
Release the computer from the docking
mechanism by sliding the ArmadaStation
manual release lever to the right.