Multi Effects; Parameter List - Roland TD-25 Parameter Manual

Multi Effects

Effect Type Page Effect Type
OFF LONG REVERB
STEREO DELAY p. 18 SATURATOR
REVERSE DELAY p. 18 SUPER FILTER
TAPE ECHO FILTER+DRIVE
p. 18
CHORUS p. 18 AUTO WAH
PHASER p. 18 LO-FI COMPRESS
STEP PHASER p. 18 DISTORTION
FLANGER p. 19 OVERDRIVE
REVERB p. 19 ISOLATOR

Parameter List

STEREO DELAY
This is a stereo delay.
Parameter Value
Time Left 0–1300 msec
Time Right 0–1300 msec
Feedback -98–+98 %
Phase Left NORMAL, INVERSE
Phase Right NORMAL, INVERSE
Wet Gain Low -15–+15 dB
Wet Gain High
-15–+15 dB
REVERSE DELAY
This is a reverse delay that adds a reversed sound of the input sound as a delayed sound. A chorus is
connected immediately after the reverse delay.
Parameter Value
Threshold 0–127
DlyTime 0–1300 msec
Feedback -98–+98 %
Page Effect Type
p. 19 RING MODULATOR
p. 19 STEP RINGMOD
p. 20 PITCH SHIFT
AUTO PAN
p. 20
p. 20
p. 20
p. 20
p. 21
p. 21
Explanation
Adjusts the delay time from when the direct sound begins until the left
delay sound is heard.
Adjusts the delay time from when the direct sound begins until the
right delay sound is heard.
Proportion of the delay sound that is to be returned to the input.
Negative (-) settings invert the phase.
Phase of the left delay sound
Phase of the right delay sound
Amount of boost/cut for the effect sound's lower range
Amount of boost/cut for the effect sound's upper range
Explanation
Volume at which the reverse delay will begin to be applied
Delay time from when sound is input into the reverse delay until the
delay sound is heard
Proportion of the delay sound that is to be returned to the input of the
reverse delay.
Negative (-) settings invert the phase.
TAPE ECHO
Page
p. 21
p. 21
Simulates a tape-type echo unit of the past.
p. 21
Parameter Value
p. 21
Rate 0–127
Intensity 0–127
CHORUS
This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.
Parameter Value
PreDelay
0.0–100 msec
Rate 0–127
Depth 0–127
Phase 0–180 deg
Filter Type OFF, LPF, HPF
Cutoff 200–8000 Hz
PHASER
A phase-shifted sound is added to the original sound and modulated.
Parameter Value
4-STAGE, 8-STAGE,
Mode
12-STAGE
Manual 0–127
Rate 0–127
Depth
0–127
Resonance 0–127
STEP PHASER
This is a stereo phaser. The phaser effect will be varied gradually.
Parameter Value
4-STAGE, 8-STAGE,
Mode
12-STAGE
Manual 0–127
Rate 0–127
Depth
0–127
Resonance 0–127
Step Rate
0–127
18
Explanation
Tape speed
Amount of echo repeat
Explanation
Adjusts the delay time from the direct sound until the chorus sound is
heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Type of filter
OFF: no filter is used
LPF: cuts the high frequency range
HPF: cuts the low frequency range
Frequency when using the filter to cut a specific frequency range
Explanation
Number of stages in the phaser
Adjusts the frequency from which the sound will be modulated.
Frequency of modulation
Depth of modulation
Amount of feedback
Explanation
Number of stages in the phaser
Adjusts the frequency from which the sound will be modulated.
Frequency of modulation
Depth of modulation
Amount of feedback
Rate of the step-wise change in the phaser effect