Load Backup; Save Backup; Delete Backup; Loading A Backup From A Usb Flash Drive - Roland TD-25 Parameter Manual

Setup

Load Backup

Loading a Backup from a USB Flash Drive

Here's how to load a backup from a USB flash drive into the TD-25.
NOTE
When you load a backup, all settings in the TD-25 will be erased.
1.
Use the [INSTRUMENT] knob to select the backup that you want to load.
2.
Press the [F3] (LOAD) button.
3.
Press the [F3] (OK) button.

Save Backup

You can save 99 backups (1–99).

Backing-Up to a USB Flash Drive

All settings of the TD-25 can be saved on a USB flash drive.
1.
Use the [INSTRUMENT] knob to select the backup destination number.
If you press the [F2] (NEW) button, a vacant number is selected.
2.
Press the [F3] (SAVE) button.
3.
If you want to change the name, press the [F2] (NAME) button, enter the name, and then
press the [F1] (EXIT) button.
Operation Function
[F2] (C) [F3] (A) buttons Move the cursor
[INSTRUMENT] knob Change the character
[KICK] (ENTER) + [F2] Delete
[KICK] (ENTER) + [F3] Insert
4.
Press the [F3] (OK) button.
* Before using a USB flash drive for the first time, you must format it on the TD-25 (p. 17).
* Backup files are saved in the Roland/TD-25/Backup folder of the USB flash drive.

Delete Backup

Deleting a Backup from a USB Flash Drive

Here's how to delete a backup that's been saved on a USB flash drive.
1.
Use the [INSTRUMENT] knob to select the backup that you want to delete.
2.
Press the [F3] (DELETE) button.
3.
Press the [F3] (OK) button.
16