Power Button Board - HP pavilion x360 Maintenance And Service Manual

f. Remove the webcam/microphone module cable (3).
The webcam/microphone module cable is available using spare part number 809823-001.
Reverse this procedure to reassemble and install the display assembly.

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
6. Remove the WLAN module (see
7. Remove the system board (see
8. Remove the display assembly (see
Remove the power button board:
1. Remove the Phillips PM2.0×4.1 screw (1) that secures the power button board to the base enclosure.
2. Slide the power button board (2) forward until it is clear of the base enclosure.
Keyboard/top cover on page
WLAN module on page 29).
System board on page 31).
Display assembly on page
Spare part number
809830-001
22).
Battery on page 25).
38).
Power button board 45