System Board - HP pavilion x360 Maintenance And Service Manual

System board

Description
Equipped with an Intel Core i5-5200U 2.20-GHz (SC turbo up to 2.70-GHz) processor (1600-MHz FSB,
3.00-MB L3 cache, dual core, 15 W), a solid-state drive slot, and the Windows 8 Professional
operating system
Equipped with an Intel Core i5-5200U 2.20-GHz (SC turbo up to 2.70-GHz) processor (1600-MHz FSB,
3.00-MB L3 cache, dual core, 15 W), a solid-state drive slot, and the Windows 8 Standard
operating system
Equipped with an Intel Core i5-5200U 2.20-GHz (SC turbo up to 2.70-GHz) processor (1600-MHz FSB,
3.00-MB L3 cache, dual core, 15 W), a solid-state drive slot, and a non-Windows 8 operating system
Equipped with an Intel Core i5-5200U 2.20-GHz (SC turbo up to 2.70-GHz) processor (1600-MHz FSB,
3.00-MB L3 cache, dual core, 15 W) and the Windows 8 Professional operating system
Equipped with an Intel Core i5-5200U 2.20-GHz (SC turbo up to 2.70-GHz) processor (1600-MHz FSB,
3.00-MB L3 cache, dual core, 15 W) and the Windows 8 Standard operating system
Equipped with an Intel Core i5-5200U 2.20-GHz (SC turbo up to 2.70-GHz) processor (1600-MHz FSB,
3.00-MB L3 cache, dual core, 15 W) and a non-Windows 8 operating system
Equipped with an Intel Core i3-5010U 2.10-GHz processor (1600-MHz FSB, 3.00-MB L3 cache, dual core,
15 W) and the Windows 8 Professional operating system
Equipped with an Intel Core i3-5010U 2.10-GHz processor (1600-MHz FSB, 3.00-MB L3 cache, dual core,
15 W) and the Windows 8 Standard operating system
Equipped with an Intel Core i3-5010U 2.10-GHz processor (1600-MHz FSB, 3.00-MB L3 cache, dual core,
15 W) and a non-Windows 8 operating system
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
6. Remove the WLAN module (see
When replacing the system board, be sure that the fan/heat sink assembly (see
on page 34) and the memory modules (see
system board and installed on the replacement system board.
Remove the system board:
1. Release the wireless antenna cables from the retention clips (1) built into the fan/heat sink assembly.
Keyboard/top cover on page
WLAN module on page 29).
Memory module on page
Spare part number
809842-601
809842-501
809842-001
809841-601
809841-501
809841-001
809840-601
809840-501
809840-001
22).
Battery on page 25).
Fan/heat sink assembly
35) are removed from the defective
System board 31