Advanced Wireless 11G Router Configuration; Adding Advanced Wireless 11G Router To Existing Network - KTI Networks KWG-400 User Manual

Table of Contents

11g Wireless Security Router User Guide

Select "Manually" in the "Configure" location from the drop-down list.

4. Click "Save" from the file menu then "Quit" TCP/IP.

5. Restart the computer.

6-3 Advanced Wireless 11g Router Configuration

To configure your Advanced Wireless 11g Router, use your Web Browser and follow the

instructions given in Chapter 3: Internet Access, section 3.3. To configure advanced

settings, see Chapter 4: Advanced Applications.

If the Advanced Wireless 11g Router is to be added to an existing Macintosh computer

network, the computers will have to be configured to connect to the Internet via the

Advanced Wireless 11g Router.

1. From the "Apple" menu, select "Control Panel" and click on "TCP/IP".

2. From the "File" menu, select "Configurations" and select your existing

network configuration. Click "Duplicate".

3. Rename your existing configuration. Click "OK", and "Make Active".

4. In the Setup area:

In the "IP Address" location, enter the IP Address that you want to

assign to the computer. (see the notes on Fixed IP Addresses 2-4 above).

Enter "255.255.255.0" in the "Subnet Mask" location.

Enter "192.168.1.1" (the Advanced Wireless 11g Router's default IP

Address) in the "Router Address" location.

Enter the ISP's IP Address in the "Name Server" location if your ISP

has provided the information.

Close the window.

Select "Manually" in the "Configure" location from the drop-down

list.