Dynamic Routing - KTI Networks KWG-400 User Manual

11g Wireless Security Router User Guide

4-10 Dynamic Routing

The Dynamic Routing feature allows your Wireless Security Router to exchange routing
information with other routers in the network. Enabling this feature is likely to enhance
performance of your Wireless Security Router.
TX:
RX:
Show Routing Table:
Apply:
Undo:
Below is Routing Table Entry List. This table shows the status for routing information.
You can click Refresh to update the table information.
From the drop-down list, select one of the routing information
types, "RIP-1", "RIP-1 Compatible", or "RIP-2", to enable
the "TX" (transmit) function. "RIP-1" is the protocol used by
older routers. Newer routers should use "RIP-2". "RIP-1
Compatible" servers to broadcast RIP-1 and multicast RIP-2.
From the drop-down list, select one of the routing information
types, "RIP-1" or "RIP-2", to enable the "RX" (receive)
function.
Click this button after clicking Apply to see current routing
information.
Click this button after making any changes for activating the
settings.
Click this button if you are not satisfied with the settings in
this page before clicking Apply.
- 43 -