Special Applications - KTI Networks KWG-400 User Manual

11g Wireless Security Router User Guide
Ext. Port
Protocol
Int. Ports
IP Address
Enable
Apply
Cancel
Example: If the service port number 80~80 (representing an HTTP web address) is
entered in "Ports" and 192.168.1.100 is entered in "Redirect IP Address", then all
HTTP requests from external Internet users will be directed to the PC/server with the
192.168.1.100 fixed IP Address.

4-8 Special Applications

Some applications use multiple TCP/UDP ports to transmit data. Due to the NAT, these
applications cannot work with the Wireless Security Router. Port Triggering allows some
of these applications to work properly. Note that only one PC can use each Port
Triggering setting at any time.
Most of applications usually use their individual port number
for its incoming and outgoing data packets. However, some of
the application may use different port number for incoming
and outgoing data packets. In this case, you have to enter the
port number used by incoming data packets here.
Specify the protocol type as "TCP" or "UDP" which is used
by specific service.
Most of applications usually use their individual port number
for its incoming and outgoing data packets. However, some of
the application may use different port number for incoming
and outgoing data packets. In this case, you have to enter the
port number used by outgoing data packets here.
Enter the appropriate IP Addresses of the service computers in
the "Redirect IP Address" locations.
Check to make this forwarding setting active.
Click this button after making any changes for activating the
settings.
Click this button if you are not satisfied with the settings in
this page before clicking Apply.
- 39 -