Static Routing - KTI Networks KWG-400 User Manual

11g Wireless Security Router User Guide

4-11 Static Routing

The Static Routing feature allows PCs that are connected to the Wireless Security Router,
either directly or through a hub/switch (in the immediate LAN), to communicate with
other PCs in the respective LAN segment which are connected to the Wireless Security
Router through another router (destination LAN). Up to 20 route entries may be input
into the Wireless Security Router. The diagram below gives an example of the physical
connections required to use Static Routing.
In the above diagram, PC2 in LAN#2 is connected to the Wireless Security Router via
another router while PC1 in LAN#1 is connected to the Wireless Security Router directly.
Without configuring the Static Routing function, the two PCs would not be able to
communicate with each other.
- 44 -