ProForm Pro 2500 PFTL14011.1 User Manual page 10

6. Remove the four 3/8" x 1" Screws (6) and
four 3/8" Star Washers (14) from the Handrail
Brackets (89). Then, remove the Handrail
Brackets from the Left and Right Handrails (92,
93). The Screws and Star Washers will be
used in step 8.
7. Remove the four 3/8" x 1" Flat Head Screws (15)
and four 3/8" Star Washers (14) from the Left
and Right Uprights (90, 99).
Orient the Handrail Brackets (89) so that the
indicated holes are in the positions shown.
Insert the Upright Wire (88) through the left
Handrail Bracket.
Attach the Handrail Brackets (89) to the Uprights
(90, 99) with the four 3/8" x 1" Flat Head Screws
(15) and four 3/8" Star Washers (14) that you
just removed. Tighten the Screws.
8. Identify the Left and Right Handrails (92, 93).
Hold the Left Handrail (92) near the Left Upright
(90). Insert the Upright Wire (88) into the large
hole in the bottom of the Left Handrail and out of
the front of the Left Handrail.
Slide the Left Handrail (92) onto the left Handrail
Bracket (89), and attach the Left Handrail with
two of the 3/8" x 1" Screws (6) and 3/8" Star
Washers (14) that you removed in step 6. Do
not tighten the Screws yet.
Attach the Right Handrail (93) as described
above. Note: There is not a wire in the Right
Upright (99).
6
14
7
Hole
88
15
14
90
8
92
88
14
6
89
14
6
90
10
6
14
89
6
89
6
14
92
Hole
89
99
89
93
89
14
6
99
6
14
93
15
14
14
6