Rinnai Avenger 25 Operation Manual page 9

It is recommended that a dedicated 240V 10 Amp power point be used with this appliance. DO NOT
use power boards or double adaptors to operate this appliance. Heater MUST NOT be located below a
power socket-outlet
DO NOT place containers of liquid on top of the heater. Water spillage can cause extensive damage to
the appliance and create an electrocution hazard.
When the heater is unplugged the for an extended period the clock will stop and will
need to be reset. However programmed ON/OFF times will remain in the memory.
NOTE
Turn the heater OFF after use. DO NOT unplug the heater while it is in operation or while the fans are
still cycling. DO NOT move the heater while it is in operation or while the fans are still cycling.
To prevent discolouration of floor coverings from heat, it is recommended that a mat be placed in front
of the heater when it is in operation.
When the heater is operated for the first time or after long periods of non use a slight odour may be
emitted, this is normal. However if odours persist switch off the appliance and contact Rinnai.
During peak operating periods the filters should be cleaned weekly, however if the Filter warning
indicator illuminates, turn off the appliance immediately and clean filters before further use.
Rinnai
RC-671-42.indd 6
IMPORTANT POINTS
2
ON
OFF
39

30
Operation Manual
07.2.13 9:37:25 AM