Technical Specifications - Omnitronic FAD-9 User Manual

Lower/Left Value
Specifies the value of the control change
message transmitted when you move the fader
all the way downward.
Buttons [Mod 1, 2 and Button 1 to 9]
These buttons transmit a control change
message. You can choose whether these
buttons will be enabled, the type of button
operation, the control change or note number,
and the values that will be transmitted when
the button is pressed. These MIDI messages
are transmitted on the global Scene MIDI
Channel.
Assign Type
This specifies the type of message that will be
assigned to the button. You can disable the
button (no assignment), or assign a note
message or a control change.
Button Behavior
Selects one of the following two modes:
• Momentary: The Note On or On Value will be
transmitted when you press the button, and the
Note Off or Off Value will be transmitted when
you release it.
• Toggle: The Note On or On Value will be
transmitted alternately with the Note Off or Off
Value each time you press the button.
CC/Note Number
Specifies the CC number or note number of the
control change message that will be
transmitted.
On Value
Specifies the On value of the control change or
note on message.
Off Value
Specifies the Off value of the control change
message.
You can set this only if the assign type is
[Control Change].
Transport buttons
Operating the transport buttons will transmit
either control change messages or MMC
messages, depending on the assign type. For
each of these six buttons, you can specify the
message that is assigned, the way in which the
button will operate when pressed, the control
change number, or an MMC command.
Assign Type
Specifies the type of message assigned to the
transport button. You can disable the button or
assign a control change message or MMC
message.
Button Behavior
Selects one of the following two modes:
• Momentary: A control change message with
a value of 127 will be transmitted when you
press the transport button, and with a value of
0 when you release the button.
• Toggle: Each time you press the transport
button, a control change message with a value
of 127 or 0 will be transmitted alternately.
You cannot specify the button behavior if the
assign type is [MMC]. If you have specified
[MMC], an MMC command will be transmitted
each time you press the button.
CC Number
Specifies the control change number of the
control change message that is transmitted.
You can set this only if the assign type is
[Control Change].
MMC Command
Selects one of the following 13 types of MMC
commands as the MMC message that will be
transmitted: Stop, Play, Deferred Play, Fast
Forward, Rewind, Record Strobe, Record Exit,
Record Pause, Pause, Eject, Chase,
Command Error Reset, MMC Reset.
MMC Device ID
Specifies the device ID of the MMC message.
Normally you will specify 127. If the device ID
is 127, all devices will receive the MMC
message.

6. TECHNICAL SPECIFICATIONS

Power supply:.................... 5 V DC via USB bus
Power consumption: ......... <100 mA
USB port:........................... 2.0, type mini-B
Dimensions (WxDxH):....... 345 x 97 x 39 mm
Weight: .............................. 430 g
Operating system:............. Windows XP, Vista, 7
.......................................... Mac OS X 10.3.9 and
.......................................... better
Please note: Every information is subject to
change without prior notice. 03.04.2012 ©
12/12 00068724.DOC, Version 1.0