Technical Specifications - Omnitronic PAD-12 User Manual

• Momentary: A control change message with
a value of 127 will be transmitted when you
press the transport button, and with a value of
0 when you release the button.
• Toggle: Each time you press the transport
button, a control change message with a value
of 127 or 0 will be transmitted alternately.
You cannot specify the button behavior if the
assign type is [MMC].If you have specified
[MMC], an MMC command will be transmitted
each time you press the button.
CC Number
Specifies the control change number of the
control change message that is transmitted.
You can set this only if the assign type is
[Control Change].
MMC Command
Selects one of the following 13 types of MMC
commands as the MMC message that will be
transmitted: Stop, Play, Deferred Play, Fast
Forward, Rewind, Record Strobe, Record Exit,
Record Pause, Pause, Eject, Chase,
Command Error Reset, MMC Reset.
MMC Device ID
Specifies the device ID of the MMC message.
Normally you will specify 127. If the device ID
is 127 all devices will receive the MMC
message.
Buttons [Mod Trigger 1 and 2]
Operating the buttons will transmit either
control change messages or note messages,
depending on the assign type. You can choose
whether these buttons will be enabled, the type
of button operation, the control change number
or note number, and the values that will be
transmitted when the button is pressed. These
MIDI messages are transmitted on the global
Scene MIDI Channel.
Assign Type
This specifies the type of message that will be
assigned to the button. You can disable the
button (no assignment), or assign a note
message or a control change message.
Button Behavior
Selects one of the following two modes:
• Momentary: The Note On or On Value will
be transmitted when you press the button, and
the Note Off or Off Value will be transmitted
when you release it.
• Toggle: The Note On or On Value will be
transmitted alternately with the Note Off or Off
Value each time you press the button.
CC/Note Number
Specifies the CC number or note number of the
control change message that will be
transmitted.
On Value
Specifies the On value of the control change or
note on message.
Off Value
Specifies the Off value of the control change
message.
You can set this only if the assign type is
[Control Change].

6. TECHNICAL SPECIFICATIONS

Power supply:.................... 5 V DC via USB-Bus
Power consumption: ......... <100 mA
USB port:........................... 2.0, type mini-B
Dimensions (WxDxH):....... 345 x 97 x 39 mm
Weight: .............................. 470 g
Operating system:............. Windows XP, Vista, 7
.......................................... Mac OS X 10.3.9 and
.......................................... better
Please note: Every information is subject to
change without prior notice. 03.04.2012 ©
12/12 00068740.DOC, Version 1.0