Adjusting The Direction Of Air Circulation - Fujitsu 9378589100 Operating Manual

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
Start air conditioner operation before performing this procedure.
To set the operation mode
Vertical air direction adjustment
●
Each time the button is pressed, the air direction range will change as follows:
The remote controller display does not change.
Recommended airfl ow direction setting:
1, 2, 3, 4: During cooling/dry mode
During heating mode
2, 3, 4:
The vertical airfl ow direction is set automatically as shown, in accordance with the
●
type of operation selected.
During cooling/dry mode
During heating mode*
During AUTO mode operation, for the fi rst minute after beginning operation, airfl ow
●
will be horizontal 1; the air direction cannot be adjusted during this period.
Horizontal air direction adjustment.
●
The function cannot be used.
9378589100_OM.indb 13 9378589100_OM.indb 13
Press the START/STOP button to start the air conditioner, and then pro-
ceed as follows.
Press the vertical airfl ow direction and swing button to adjust the direction of
the vertical airfl ow.
1 2 3 4
: Horizontal fl ow 1
: Downward fl ow 4
● Attempting to move up/down air di-
rection fl aps manually could result in
improper operation; in this case, stop
operation and restart. The louvers
should begin to operate properly
again.
● When used in a room with infants,
children, elderly or sick persons, the
air direction and room temperature
should be considered carefully when
making settings.
En-13
2013-6-18 16:03:39 2013-6-18 16:03:39