Update The Pidd - Polaris RiderX PIDD Owner's Manual

Update the PIDD

1. Before updating the PIDD, always export your
existing tracks and waypoints to a USB drive to avoid
losing them. When the PIDD update is performed, all
formerly saved tracks and waypoints will be erased
from the PIDD.
2. After downloading an update from your RiderX
account and saving the extracted files to the USB
flash drive, connect the flash drive to the USB
connector on your vehicle. For vehicle USB connector
locations, see page 66.
NOTE: Always download the most recent data from
RiderX.com before updating the PIDD.
3. Turn the ignition key to the ON/RUN position. If your
vehicle does not have a battery, start the engine and
allow the idle to stabilize before continuing. Do not
allow an engine to run in an enclosed area without
adequate ventilation.
4. Press any display key to display the PIDD screen
icons.
5. Press Key 3 to display the main menu options.
6. Toggle to System Settings. Press Key 3 to select.
7. In the System Settings menu, select SYSTEM INFO.
Key 1 Key 2 Key 3 Key 4
71
Key 5