Connect, Register And Update; Connect Your Smartphone To The Pidd; Register For A Riderx Account - Polaris RiderX PIDD Owner's Manual

Connect, Register and Update

Connect Your Smartphone to the PIDD

The PIDD can be used with most smartphones. RiderX
can be used to provide trail data for the PIDD device.
Before registering and connecting the PIDD to RiderX,
use the following steps to connect your smartphone to
the PIDD.
1. Open your phone's Bluetooth menu and make your
phone discoverable.
2. On the vehicle, turn the ignition key to the ON/RUN
position. The engine does not have to be running.
3. View the Bluetooth settings on your phone. The PIDD
Connect Bluetooth Adapter should appear as "Polaris
- # # # #" (the last 4 digits of the adapter's address).
4. When the adapter is visible, select it to connect your
phone to the adapter.
5. Launch the PIDD and verify that the connection status
bar indicates the phone is connected.

Register for a RiderX Account

1. If you don't already have a RiderX account, go to
RiderX.com.
2. Click Sign In at the upper right corner of the page.
3. Scroll down and complete the online form to register
for a free account.
NOTE: Multiple PIDD devices can be registered to
the same RiderX account. Additional accounts are
not required for multiple devices.
68