Fuel Type Selection (Ethanol/Non-Ethanol); Pidd Power Sources - Polaris RiderX PIDD Owner's Manual

Fuel Type Selection (Ethanol/non-Ethanol)

1. In the Vehicle Settings menu, toggle to FUEL TYPE.
2. Press Key 3 to select.
Key 1
3. Press Key 2 or Key 4 to toggle between the fuel
types. When the screen displays the fuel type used in
the fuel tank, press Key 3 to exit.

PIDD Power Sources

NOTE: On snowmobiles equipped with an electric
start battery and PIDD, always turn the key off when
the PIDD is not in use. If the key remains in the RUN
position after using the auxiliary engine stop switch to
stop the engine, the PIDD remains active, drawing
power from the battery.
NOTE: The PIDD is not dependent on the battery
while the engine is running, but the battery supplies a
constant power source when the engine is off or when
the engine is transitioning between forward and
reverse operation. If a battery is not installed, the
PIDD reboots when the engine is started and when
electronic reverse (PERC) is used.
Key 2 Key 3 Key 4
43
Key 5