Polaris RiderX PIDD Owner's Manual page 23

When Go To is turned ON in the Waypoint Manager, an
arrow displays on the map, pointing in the direction of the
selected waypoint. The distance to the waypoint is shown
in the lower right hand corner of the display and is based
on shortest possible distance to waypoint (as the crow
flies). This feature can be used for only one waypoint at a
time.
1. Press Key 5 to toggle to the selection list.
2. Press Key 4 until Go To is highlighted. Press Key 5 to
toggle the setting ON or OFF.
Key 1
3. Press Key 5 to exit the map.
Key 1
NOTE: When Go To is ON, the orange arrow points to
the waypoint that was selected when Go To was
turned ON.
Key 2 Key 3
Key 2 Key 3
Key 4
Key 4
22
Key 5
Key 5