Mitsubishi HS-HD2000U Owner's Manual page 60

Advanced Features
Counter zero stop
Counter zero stop allows you to quickly access the beginning of a recorded or
playback section of a tape. The counter zero stop will automatically fast forward or
rewind the tape to "0H00M00S" and stop.
1 Press CANCEL on the remote control at the point you wish to locate later. The
counter will reset to "0H00M00S".
2 When you wish to return to the point specified in step 1, press VIDEO on the
remote control. The video function menu appears on your screen. Press
VIDEO until the Counter zero stop function appears.
3 Turn the SHUTTLE ring to the right to start the counter zero stop.
The VCR will automatically search to the counter "0H00M00S" and then stop. The
VCR may stop slightly before or after the counter "0H00M00S".
Index search
Index search is a way to find specific points on a tape. Before using index search,
index marks will be placed at specific places on the tape. Index search is then
used to find these marks. Index marks are added automatically whenever your
VCR starts a new recording; you can also add index marks manually at any point
during recording.
automatic index marks
Whenever recording is begun from STOP mode, an index mark is automatically
added to the tape. When recording in analog, a message will indicate that the
mark is being added.
Index marks are not added when you press PAUSE or REC to begin recording from
the record-pause mode.
manual index marks
To add an index mark yourself, press REC on the remote control while a tape is
recording.
Index marks must be added at least one minute apart.
1 When the tape is stopped, press INDEX
INDEX to search in reverse. The VCR will fast forward or rewind and
I\
index search display appears on the TV.
Once the VCR finds an index mark, it will begin playing back the tape from that
point.
2 You can press INDEX
many index marks. For example, to find the third index mark ahead from the
point you are at, press INDEX
count down the number of marks passed before playback begins.
3 To cancel index search, press STOP.
Index search may not work correctly if the interval between two index marks
is shorter than 5 minutes in HS (high speed) mode, 10 minutes in STD
(standard) mode, 5 minutes in SP (standard play) mode or 15 minutes in EP
(extended play) mode.
58
^I
to begin a forward search; press
^I
or INDEX up to 19 times to search for that
I\
^I
three times. The on-screen display will
IMPORTANT
VCR
Counter zero stop
Use ENTER to start
STOP
REC
INDEX
VCR Looking
for index+ 1
⁄‡‚‡‡‡‡‡‡‹
REM 1:40
0h20m08s
(This screen appears during
analog playback only.)