Table of Contents
Advertisement
5 PROGRAMMING
5 PROGRAMMING
The programming procedure, basic read/write programs, and program examples for
the AJ65SBT-64AD are described.
Refer to Section 3.6 for the remote registers and to the AnSHCPU/AnACPU/AnUCPU/
QCPU-A (A Mode) programming manual (dedicated instructions) for details of the
dedicated instructions.
5.1 Programming Procedure
Create a program which executes the AJ65SBT-64AD analog/digital conversion by
following the procedure below:
START
A/D conversion enable/prohibit specification
Input range setting
Perform moving average processing?
Yes
Moving average processing count setting
Specify the channel for which moving average
processing will be performed.
Read digital output value read
END
5 - 1
MELSEC-A
No
5
Advertisement
Table of Contents
Troubleshooting
