Table of Contents
Advertisement
Section 1
Major Science Mini Pro 300V Power Supply has been tested and found to
comply with the limits for the CE regulation. Also, it is RoHS compliant to
deliver confident product which meets the environmental directive. These limits
are designed to provide reasonable protection against harmful interference
when the instrument series is operated in a commercial environment. This
instrument series used together with power supply unit generates, uses, and
can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this instrument series in a residential area
is likely to cause harmful interference in which case the user will be required to
correct the interference at their expense. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. It is strongly recommended for the
user to read the following points carefully before operating this equipment.
1.
Read and follow the manual instructions carefully.
2.
Do not alter the equipment. Failure to follow these directions could result
in personal and/or laboratory hazards, as well as invalidate equipment
warranty.
3.
Use a properly grounded electrical outlet with correct voltage and current
handling capacity.
4.
Disconnect from power supply before maintenance and servicing. Refer
servicing to qualified personnel.
5.
Never use this instrument series without having the safety cover correctly
in position.
6.
Do not use the unit if there is any sign of damage to the external tank or
cover. Replace damaged parts.
7.
Do not use in the presence of flammable or combustible material; fire or
explosion may result. This device contains components which may ignite
such materials.
8.
Refer maintenance and servicing to qualified personnel.
9.
Ensure that the system is connected to electrical service according to
local and national electrical codes. Failure to make a proper connection
may create fire or shock hazard.
10. Use appropriate materials and operate correctly to avoid possible hazards
Warning
4
Hide quick links:
Advertisement
Table of Contents
