Table of Contents
Advertisement
Avoiding Damage to the Instrument
1. Do not attempt to operate the device if damage is suspected.
2. Protect this unit from physical damage, corrosive agents and extreme
temperatures (direct sunlight, etc.).
3. For proper ventilation and safety concerns, keep at least 10 cm of space
behind the instrument, and at least 5 cm of space on each side.
4. Use high level of precaution against the damages on the unit.
5. Do not operate the unit out of environmental conditions addressed
above.
6. Do not operate the power supplies in high humidity environments (>
95%), or where condensation may occur.
7. To avoid condensation after operating the power supply in a cold room,
wrap the unit in a plastic bag and allow at least 2 hours for the unit to
equilibrate to room temperature before removing the bag and operating
the unit.
8. Prior to applying any cleaning or decontamination methods other than
manufacturer's recommendation, users should check with the
manufacturer's instruction to see if the proposed method will damage the
equipment.
Equipment Operation
Follow the guidelines below to ensure safe operation of the unit:
1. NEVER access dangerous chemicals or other materials to prevent possible
hazard of explosion and damage.
2. Do not operate the unit without lids or covers to prevent possible hazards.
3. A temporary conductivity caused by condensation might occur even though
this series is rated Pollution Degree 2 in accordance with IEC 664.
Symbol
Symbols used on the power supply are explained below.
Indicates an area where a potential shock hazard may exist.
Consult the manual to avoid possible personal injury or instrument
damage.
Indicates disposal instruction.
DO NOT throw this unit into a municipal trash bin when this unit has
reached the end of its lifetime. To ensure utmost protection of the
global environment and minimize pollution, please recycle this unit.
6
Hide quick links:
Advertisement
Table of Contents
