Operation Instructions; Control Interface; Section 5 Operation Instructions - Major Science mini pro Instruction Manual

Section 5

5.1 Control interface

You will be able to find six buttons and 4 LED indicators from the faceplate.
The LED indicates the status of the unit.
a. Setup Mode (before pressing RUN/Start)
LED light indicates your current parameter. If you are setting a value for
Voltage, the Voltage LED will be lit.
b. Operation Mode
After you start the experiment, the LED light next to the RUN/STOP button
will light up to indicate unit under operation.
– Select voltage value
1.
– Select current value
2.
– Timer button
3.
– Increase the Voltage, Current or Time
4.
– Decrease the Voltage, Current, or Time
5.

Operation Instructions

13