Lancom GS-2310P User Manual page 183

Hide thumbs Also See for GS-2310P:
Table of Contents

Advertisement

LANCOM GS-2310P/GS-2326(P) User Manual
5 Security
RADIUS Authentication Server Configuration
The table has one row for each RADIUS Authentication Server and a number of columns, which are:
#:
The RADIUS Authentication Server number for which the configuration below applies.
Enabled:
Enable the RADIUS Authentication Server by checking this box.
IP Address/Hostname:
The IP address or hostname of the RADIUS Authentication Server. IP address is expressed in dotted decimal notation.
Port:
The UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the default port (1812) is used
on the RADIUS Authentication Server.
Secret:
The secret - up to 29 characters long - shared between the RADIUS Authentication Server and the switch.
RADIUS Accounting Server Configuration
The table has one row for each RADIUS Accounting Server and a number of columns, which are:
#:
The RADIUS Accounting Server number for which the configuration below applies.
Enabled:
Enable the RADIUS Accounting Server by checking this box.
IP Address/Hostname:
The IP address or hostname of the RADIUS Accounting Server. IP address is expressed in dotted decimal notation.
Port:
The UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the default port (1813) is used on
the RADIUS Accounting Server.
Secret:
The secret - up to 29 characters long - shared between the RADIUS Accounting Server and the switch.
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
#:
The TACACS+ Authentication Server number for which the configuration below applies.
Enabled:
Enable the TACACS+ Authentication Server by checking this box.
IP Address/Hostname:
The IP address or hostname of the TACACS+ Authentication Server. IP address is expressed in dotted decimal notation.
Port:
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0 (zero), the default port (49) is used on
the TACACS+ Authentication Server.
Secret:
The secret - up to 29 characters long - shared between the TACACS+ Authentication Server and the switch.
183

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GS-2310P and is the answer not in the manual?

This manual is also suitable for:

Gs-2326pGs-2326

Table of Contents