Voice Vlan; Configuration - Lancom GS-2310P User Manual

LANCOM GS-2310P/GS-2326(P) User Manual

3 Configuration

VLAN ID:
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from 1-4094.
Port Members:
A row of check boxes for each port is displayed for each Group Name to VLAN ID mapping. To include a port in a mapping,
check the box. To remove or exclude the port from the mapping, make sure the box is unchecked. By default, no ports
are members, and all boxes are unchecked.
Adding a New Group to VLAN mapping entry:
Click to add a new entry in mapping table. An empty row is added to the table, the Group Name, VLAN ID and port
members can be configured as needed. Legal values for a VLAN ID are 1 through 4094. The button can be used to undo
the addition of new entry.
Buttons:
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Auto-refresh:
Activate the auto-refresh to refresh the information automatically.
Refresh:
Refresh the Protocol Group Mapping information manually.

3.11 Voice VLAN

Voice VLAN is VLAN configured specially for voice traffic. By adding the ports with voice devices attached to voice VLAN,
you can perform QoS-related configuration for voice data, ensuring the transmission priority of voice traffic and voice
quality.
3.11.1 Configuration
The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can classify and schedule
network traffic. It is recommended that there be two VLANs on a port - one for voice, one for data. Before connecting
the IP device to the switch, the IP phone should configure the voice VLAN ID correctly. It should be configured through
its own GUI.
Web Interface
To configure Voice VLAN in the web interface:
1. Select "Enabled" in the Voice VLAN Configuration.
2. Specify VLAN ID, Aging Time, and Traffic Class.
4. Specify (Port Mode, Security, Discovery Protocol) in the Port Configuration
5. Click Apply.
Figure 3-11.1: The Voice VLAN Configuration (GS-2310P)
94