Table of Contents
Advertisement
Using the menu (Continued)
I The image adjustment menu
Use this menu to adjust image-related items.
Items that can be adjusted are marked with "Yes", and those that cannot are marked with "No".
Item
Description
Contrast
Lower
Higher
Brightness
Darker
Brighter
Color
Lighter
Deeper
[Note 1]
Tint
Reddish
Greenish
Sharpness
Softer
Sharper
R-level
Less red
More red
G-level
Less green
More green
B-level
Less blue
More blue
Up/down shift
[Note 2]
Shift down
Shift up
Notes
1: Tint can only be adjusted when Video mode
2: Up/down shift can only be adjusted when Screen size
I The default setting menu
This menu shows placement status and other settings.
Item
Projection
Sets projection mode in accordance with Placement Style
mode
(Placed
on floor)
No signal
Sets the period of time to wait until turning off the power after signal input stops:
power off
Off (not turned off)
Power on
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the AC power cord is plugged in (Auto). Manual
Sets the lamp power
Lamp power
[Note 1]
Note
1: When Lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets
quieter.
Notes
• Note that if Power on is set to Auto, then if the AC power cord is plugged in when power
is restored after a power outage, the projector power will come on.
• Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power.
Unplugging the AC power cord to cut off the power will shorten the life of the lamp.
Computer
Y/P
/P
Video
S-video
B
R
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
p.24
is set to NTSC or NTSC4.43.
p.31
is set Wide.
Description
p.18
(Hung from
(Back hung
(Rear)
ceiling)
from ceiling)
1 min
2 min
...
60 min
Standard
Low
30
I The display setting menu
Use this menu to set screen display-related items.
Item
Screen size
Yes
Yes
Yes
Yes
Language
Yes
Yes
Yes
Background
Yes
Icon
Yes
Start-up screen
Notes
• If "Thru" is selected for screen size, portions exceeding the pixel count of the LCD panel
p.37
will not appear on the screen. Note that for RGB signals with clock speeds
SXGA3_60
p.38
is higher than this, the RGB pixel signal is reduced before sampling.
• Displaying the images with the aspect ratio different from the original with the purpose of
other than the personal and private viewing, using the screen size menu may violate the
copyright protected by the law.
I Reset menu (Special menu)
When other menus are not displayed and the
• Select Reset All and press the
Auto
Item
Reset all
Description
(Full): Display with LCD panel's resolution
(Thru): Display with sampling resolution (for computer input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
Select one of the languages below to use for displaying menus and messages
[
: Enter setting mode]
[
:Selection]
English/Français/Deutsch/Italiano/Español/
Português/
/
/
Screen to display when there is no input signal
Display icons as function guides
Display start-up screen when power turned on
or lower, all input pixel signals are sampled. However, if the clock speed
button is held down, the menu appears.
button to return all menu items to the factory settings.
Description
Reset all menu items to their factory settings
[
: Enter execution mode]
[Yes
31
/P
)
B
R
[Apply:
]
/
(Logo)
(Blue)
(None)
On
Off
On
Off
No]
[Apply:
]
Advertisement
Table of Contents
