Related Manuals for Milwaukee M18BDD-0
Summary of Contents for Milwaukee M18BDD-0
- Page 1 OPERATOR'S MANUAL Cat. No. M18BDD-0 M18BPD-0 M18™ CORDLESS 1/2" DRILL/DRIVER AND HAMMER DRILL/DRIVER To reduce The risk of injury, user musT read and undersTand operaTor's manual.
-
Page 2: Work Area Safety
general power Tool safeTy warnings warning read all safeTy warnings and all insTrucTions. Failure to follow the warnings and instructions may result in electric shock, fire and/or save all warnings and instructions for future reference. serious injury. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. work area safeTy attached to a rotating part of the power tool may result in personal injury. • K eep work area clean and well lit. -
Page 3: Specific Safety Rules
DC No Load RPM Steel (dia.) Masonry Low 0 - 450 13 mm 29 mm 25 mm 54 mm M18BDD-0 High 0 - 1,800 Low 0 - 450 Low 0 - 7 200 13 mm 29 mm 25 mm 54 mm 16 mm... -
Page 4: Operation
Selecting Drill or Drive Action ASSEMBLY (Cat. No. M18BDD-0) 1. To use the drilling mode, rotate WARNING Recharge only with the the torque selector collar until the drill symbol appears in line charger for the battery. For with the arrow. - Page 5 The torque specifications shown here are approximate the ON/OFF switch is not pressed. Always allow values obtained with a fully charged battery pack. the motor to come to a complete stop before using Cat. No. M18BDD-0 the control switch. For forward (clockwise) Clutch...
-
Page 6: Maintenance
WARNING Always remove battery pack before changing or removing accessories. Only use accessories specifically recommended for this tool. Others may be hazardous. For a complete listing of accessories refer to your MILWAUKEE ® accessories catalogue or go online to www.milwa ukeetools.com.au or www.milwaukeetools.co.nz. To obtain a product catalogue, please contact your local authorized MILWAUKEE ®... -
Page 7: Warranty - Australia And New Zealand
Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ® dealer or service centre. - Page 8 Milwaukee Electric Tool Corporation (Australia) Techtronic Industries (Australia) Pty. Ltd. Doncaster, Victoria, Australia, 3108 Milwaukee Electric Tool Corporation (New Zealand) Techtronic Industries (New Zealand) Pty. Ltd. Mangere, Auckland, New Zealand, 2022 Professionally made in China for Milwaukee Electric Tool Corporation Printed in China 961016050-01(A)
Need help?
Do you have a question about the M18BDD-0 and is the answer not in the manual?
Questions and answers