Installation; Before You Install - AT&T 6100 User Manual

6100_book_1ATT 11/25/00

Before You Install

1 Choose a location for the base near an electrical outlet and
a telephone jack.
This phone requires a modular telephone jack and a standard
electrical outlet (110v AC) not controlled by a wall switch.
2 Install the handset battery.
3 Attach the belt clip to the cordless handset (optional).
12:37 PM Page 3
a) Remove battery
compartment
cover by pressing
on the
indentation
and sliding
downward.
c) Place battery pack in compartment
d) Replace cover by sliding
To attach

INSTALLATION

b) Align two holes in
plug with socket
pins, and snap the
plug into place.
with the wires in the lower left
corner, along the bottom of the
battery pack.
it up into place.
To remove
3