Rock Wool Placement
7. Place the rock wool as follows:
a. Brush the rock wool using a stiff brush in a loose, gauze‐like layer.
TIP: Hold the rock wool in a tight wad with one hand while brushing with the other.
Note how the rock wool is approximately 1/8" thick over the burner ports.
TIP: Feel free to apply a generous amount of rock wool to gain a darker flame and a brighter
coal bed.
Page 5 of 11
616 GSR Driftwood Log Set
Installation Instructions
17601714.docx — 8/23/12
(SKU 94500949)
© Travis Industries, Inc.