Burner Installation - Travis Industries 616 GSR Driftwood Installation Instructions Manual

Burner Installation

NOTE: The insert should be in place, with the gas line and vent attached, and the firebacks installed
(see owner's manual for further details) before proceeding.
1. Remove the rear burner as shown below.
2. Remove the 3 screws from the back of the rear burner using a ¼" nutdriver.
Page 2 of 11
616 GSR Driftwood Log Set
Installation Instructions
17601714.docx — 8/23/12
(SKU 94500949)
NOTE: Remove the
attachment screw first.
© Travis Industries, Inc.