3. Attach the rear air deflector to the rear burner with the screws removed in the previous step.
NOTE: Verify the correct air deflector according to your fuel type
IMPORTANT: Make sure the air deflector holes are aligned, if they do not align flip the deflector
over.
4. Replace the rear burner and secure with the attachment screw.
Page 3 of 11
616 GSR Driftwood Log Set
Installation Instructions
NG Installation
LP Installation
17601714.docx — 4/30/13
(SKU 94500949)
This notch in the LP
deflector differentiates it
from the NG air deflector.
The two tabs on the rear
burner rest on top of the
front burner.
© Travis Industries, Inc.