Rock Wool Placement - Travis Industries 616 GSR Installation Instructions Manual

Rock Wool Placement

7. Place the rock wool as follows:
a. Brush the rock wool using a stiff brush in a loose, gauze‐like layer.
TIP: Hold the rock wool in a tight wad with one hand while brushing with the other.
Note how the rock wool is approximately 1/8" thick over the burner ports.
TIP: Feel free to apply a generous amount of rock wool to gain a darker flame and a brighter coal bed.
Page 4 of 10
616 GSR Traditional Log Set
Installation Instructions
17601679.docx — 6/14/13
(SKU 94500948)
© Travis Industries, Inc.