Example Of Connection - Mitsubishi P91DW Operation Manual

6

EXAMPLE OF CONNECTION

Connecting to various equipment with parallel data interface
such as medical equipment and personal computer.
Connection
Personal computer or
medical equipment
Mode switch setting
Set the mode switches on the rear panel.
• When setting the switch No. 1 to ON, FUNC, DOWN, UP, SET and
GAMMA buttons will be locked. (The functions will not be available.)
Set the switches other than No. 1 to OFF.
Installing printer driver
Printer driver is required to print the data from a personal computer connected with this
printer.
The printer driver for Windows
Product name
®
For Windows
Refer to the operation manual of the printer driver or "Read me" for installing.
®
WindowsNT is the registered trademarks of Microsoft Corporation in the U.S.A and other
countries.
1
Turn off the power switches of the digital monochrome printer
2
and the equipment to be connected.
Connect the digital monochrome printer with PC or medical
3
equipment through a parallel cable.
When inserting the parallel cable to the printer's connector,
make sure to fasten the springs at the both sides of the
connector to secure the cable.
®
is supplied with this printer.
Operating conditions
Applies for Microsoft
To PARALLEL
DATA IN
connector
1 2 3 4
PARALLEL DATA IN
LOCK
ON
OFF
ON
1 2 3 4
OFF
AC LINE
Rear panel
® ®
WindowsNT 4.0
10
Connect
Power cord
1 2 3 4
LOCK
ON
OFF
ON
OFF 1 2 3 4