Symmetricom ATS-6511A User Manual page 94

Command Example:
ATS-6511>frontpanel_button 0
Query:
settings hardware
ATS-6511>
[enable_fp_button] false
See also: network, network_config
Help:
Description: Displays the entire command list or will provide details on the specified
command <command>. Acceptable shortcuts are h or a '?'.
Syntax: help <command>
Command Examples:
ATS-6511>help <command>
ATS-6511>h <command>
ATS-6511>? <command>
Irig:
Description: Select IRIG output type. The 4387A and 4394A output modules enable the
user to independently configure an output port to generate a variety of signal formats and
timecodes. The 4387A produces modulated signal outputs and the 4394A produces DC-
level shifted outputs. By default, the output modules will produce the following signals
until reconfigured by the user:
4387A
Port 1: IRIG-B120
Port 2: IRIG-B120
Port 3: IRIG-B120
Port 4: IRIG-B120
4394A
Port 1: Pulse, period=1 s, width=1e-4 s
Port 2: Pulse, period=1 s, width=1e-4 s
Port 3: IRIG-B000
Port 4: IRIG-B000
In order to configure a specific output port the port address must be given. To identify the
port address use the slot number and port number of the desired port.
Valid DC IRIG Codes are A (000,003,007), B (000,003,007), D002, E002, G002, and
H002
Valid modulated (AM) IRIG Codes are A (130, 133, 137), B (120, 123, 127), E (111,112,
121), G (141, 142, 147), and H (111, 112, 121, 122, 127)
true=enabled, false=disabled.
88
DOC 6511_Release K
ATS-6511A/B/C Users Guide