Symmetricom ATS-6511A User Manual page 75

[when] 1998-01-01-00:06:52.834
[remote_tdc_starvation]
[active] false
[cleared]
[what] Receiving remote TDCs
[when] 2011-11-07-17:11:01.316
[occurrences] 1
[set]
[what] Not receiving remote TDCs
[when] 2011-11-07-17:10:39.722
[active] false
[occurrences] 0
[syscfg]
[active] false
[occurrences] 0
[tcxo_failure]
[active] false
[occurrences] 0
[input]
[switch] Auto Switch: A
[kas2]
[phase_step_count] 2
[phase_sync_count] 1
[ptd] 9.497872340000000e-09
[outputs]
[enabled] true
[reference]
[frequency]
[external]
[communications] bad
[locked] false
[signal] missing
[hp5071]
[can_communicate] false
[lns]
[locked] true
[ocxo_freq_control] 1
[reference_frequency_estimate] Not Ready [time] 2011-11-07-18:07:56
[unit]
[network]
[MAC] 00:A0:69:00:00:F8
[broadcast] 192.168.150.255
[default_gateway] 192.168.150.1
[ip] 192.168.150.71
[netmask] 255.255.255.0
[serial_number] 164233
[start] 2011-06-09-21:21
[uptime] 18 hours, 38 minutes, 16 seconds
[ver] tflex-5-1-0
System Errors: Alarms and events on the ATS-6511 are available via the status command. As
the events occur the system will set the alarm and time. Once the condition clears the system will
indicate the condition cleared, what the condition was, when it cleared and increment the
occurrence counter.
[clock_wander]
[active] false
[cleared]
[what] Clock wander is less than 100.000000ns
Issues with the data exchange over fiber
[syscfg]
Internal Clock Failure
Fiber Status
Auto Switching in ON, Fiber A = Master
KAS2 Data
Estimated UTC Offset
6511B only
Current network settings
Unit S/N
Unit Start up (Date/Time Set)
Amount of time 6511 has been running
Current Software Version
69
DOC 6511_Release K
ATS-6511A/B/C Users Guide
Unit MAC Address
Current Broadcast IP
Current Gateway Address
Current IP Address
Current Subnet mask