Symmetricom ATS-6511A User Manual page 46

[active] false
[occurrences] 0
J. The status of the input switch is reported. This can be manual or auto with input A or B.
[input]
[switch] Auto Switch:A
K. Once the system obtains a sufficient amount of clock data the kas2 values will be
available.
[kas2]
[ptd] 5.294117647000000e-09
L. The system will also show if the external & internal clocks have been detected, the
outputs should be enabled and the system will indicate if there is sufficient data on any
external references. The [ocxo_freq_control] should be between -98 and 98.
Reference_type = hp5071A
[reference]
[frequency]
[external]
[communications] good
[locked] true
[signal] present
[hp5071]
[can_communicate] true
[lns]
[locked] true
[ocxo_freq_control] -2
[reference_frequency_estimate] Ready
[switch]
[position] A
[state] armed
Reference_type=cesium
[reference]
[frequency]
[external]
[communications] good
[locked] true
[signal] present
[hp5071]
[can_communicate] true
[lns]
[locked] true
[ocxo_freq_control] -2
[reference_frequency_estimate] Ready
[OK] 2013-08-13T18:43:21Z
M. The [time] field shows the current time on the 6511.
[time] 2013-08-13-18:43:50
ATS-6511A/B/C Users Guide
40
DOC 6511_Release K