Connecting An Ipod; Connecting A Usb Device; Connecting An Mhl-Compatible Device - Pioneer SCLX59-K Operating Instructions Manual

03

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.
iPod iPhone AUTO/ALC/
DIRECT CONTROL DIRECT STATUS
HDMI 5 INPUT
5V 1 A
USB cable included with the iPod
Tip
! An iPod/iPhone can be connected to the receiver. For details on supported models and versions of the respec-
tive products, see Playing an iPod on page 63 .
%
Switch the receiver into standby, and then use the iPod cable to connect your iPod to the
iPod/iPhone terminal on the front panel of this receiver.
! For the cable connection, also refer to the operating instructions for your iPod.
! When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone is
kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this device.
! iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the
unit's power is turned on.)
! For instructions on playing the iPod, see
Playing an iPod
iPod/iPhone
BAND TUNER EDIT
on page 63 .

Connecting a USB device

It is possible to play audio and photo files by connecting USB devices to this receiver.
iPod iPhone
DIRECT CONTROL
%
Switch the receiver into standby then connect your USB device to the USB terminal on the
front panel of this receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device, see

Connecting an MHL-compatible device

An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
HDMI OUT
1 2 3
MAIN (HDZONE)
ARC CONTROL
SELECTABLE
HDMI OUT HDMI IN ASSIGNABLE 1 - 7
1 2 3 1 BD 2 3 4 6 7 / /MHL
MAIN (HDZONE) (DVD) (SAT/CBL) (DVR/BDR)
ARC CONTROL SELECTABLE ( 5 V 0.9 A )
% Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the rear panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see
page 112 .
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit's power is turned on.)
! For instructions on playing the MHL-compatible device, see
! Do not place the MHL device on this unit which has the power turned on.
46
Connecting your equipment
AUTO/ALC/
DIRECT STATUS BAND TUNER EDIT
HDMI 5 INPUT
5V 1 A
USB mass
storage device
Playing a USB device on page 64 .
HDMI IN
ASSIGNABLE 1 - 7
1 BD 2 3 4 6
( DVD ) ( SAT/CBL ) ( DVR/BDR )
( 5 V 0.9 A )
MHL cable
MHL enabled
device
Playing an MHL-compatible device
7 / /MHL
MHL Setup on
on page 65 .